Datalogging with Palmlog software (no longer supported)
ROM Editor tuning software.
s200 Pricing and Options
The base price for the s200 is $295 This allows the ECU to be tuned by a dealer or anyone with ROM Editor and a programmer. You will need a base program (ROM) for your vehicle/engine/ECU which you can get from your dealer.
Various additional options are available, either when the unit is ordered or as an upgrade later:
Price Description
$50 3 step rev limiter- Launch control and full throttle shift. (optional upgrade on systems purchased before 3/1/05)
$200 Boost capability. Needed for turbo or supercharged applications
$50 Datalogging capability. Required if you want to tune it yourself (optional upgrade on systems purchased before 12/13/04)
$200 ROM Editor. Required for tuning yourself.
$180 Romulator realtime emulator.
$180 Programmer (requires ROM Editor) Required for tuning yourself.
If you are interested in tuning Hondata systems for other people see the dealer requirements page for more information. If you have a Stage 2/3/4 and wish to upgrade, see the V3 upgrade page.
Upgrading the s200
With the s200, boost. datalogging and 3-step rev-limiter are enabled by entering a numeric key into HondaLogger. You do not need to ship the unit back to the dealer or Hondata, nor is the datalogging option required to enable the boost and datalogging option. For instructions on how to upgrade your s200 see the s200 upgrade guide.
ECU jumper J12
With the s200 it is recommended to cut jumper J12 inside the ECU. For US ECUs this jumper is located near the two vertical sub boards inside the ECU. For JDM ECUs remove J4 which is located on the top of the circuit board near CN2. This jumper must be replaced if the ECU is used with a Stage 2/3/4 system.